MR TARGET Black Ball Cap
Tall Armored Base with 1/2″ Bracket for 1/2″ Targets
Armored Base with 1/2″ Bracket for 1/2″ Targets
$250.00
-
ARMORED BASE with 1/2″ BRACKET
Our 1/2″ bracketed bases are specifically designed for our 1/2″ thick AR500 targets, and include a standard 3/8″ accessory slot for our spinners, gongs, and other accessories.
This base has a low-profile AR500 armored center upright designed to withstand abuse while keeping a lower, more solid center of gravity for your heavier and/or taller targets. The Armored Base also puts our Rubber Dummy and Paper Bracket targets at the correct height.
All of our modular base systems are designed for easy setup and transport. Just two pieces, (the upright portion and the H-style base) assemble together in seconds, and lay flat when disassembled. Our modular target bracket has two available slots and is designed to accommodate any of our reactive or plate targets, along with an accessory rack for gongs, spinners, and other accessories.
If you are looking for a more permanent solution simply remove the “H” base and pound the upright into the ground or pour concrete.
28lbs, 30″ tall, 1/2″ bracket slot in front for 1/2″ thick targets, and 3/8″ rear slot for 3/8″ thick standard accessories
MODULAR BASES
The secret to a good target is an excellent base (yeah, we trademarked that). We recommend one of our modular armored bases for greatest ease of use, sturdiness, and reliability. Our uprights pull right out of our H-bases allowing you to lay them flat in your truck, case, or bag and put them back together in seconds without tools.
Want a more permanent option? Pound the upright right into the ground or lay it in with some concrete. The AR500 plating will protect your armored target base, deflecting thousands of pistol and rifle rounds (seriously, you’ll be handing this thing down to your grandkids).
Want to shave off weight and save time? Check out our Quick Deploy Base System specific to our QD compatible targets. Two AR500 QD plates with integrated carrying handles and the ability to accommodate 1″ pipe extension legs to raise this target as high as you need. The pyramid-style base is designed to become more stable the taller you get.
And finally, while we always recommend splurging that little extra for one of our virtually indestructible armored bases, we do offer a “budget friendly” 2×4 base kit for the DIY backyard shooter.
TALL ARMORED BASE (MOST POPULAR)
Standing at 40” tall, this target base will raise your target to a more natural shooting position to promote muscle memory for close quarters training. This base has an armored center post to withstand thousands of rifle and handgun rounds.
FULLY ARMORED RANGE BASE
This target base is armored from top to bottom. Great protection for long range rifle, commercial ranges, rental targets, and FULL AUTO. No stray bullets will be punching holes in this base. 30″ tall.
ARMORED BASE
This base has a low-profile armored center post that withstands every kind of abuse while keeping a lower, more solid center of gravity for your heavier and/or taller targets. The Armored Base also puts our Rubber Dummy and Paper Bracket targets at the correct height. 30” tall.
2X4 WOOD BASE KIT
For shooters with a tight budget, we offer our 2×4 base and bracket kits. Steel base and top bracket protected by an AR500 armored circle plate. Choose Top Bracket only or Top Bracket & H Base combo. (2X4 NOT included)
QUICK DEPLOY BASE
The Quick Deploy Base System is made of two AR500 plates with integrated carry handles. The plates can work stand-alone, or they can accommodate 1" pipe leg extensions. Simple, fast, and virtually indestructible. Designed specifically for our QD compatible targets.
STANDARD NON-ARMORED BASE
Intended for use with our Axe Block Throwing Target, the Standard non-armored Base leaves behind much of our rugged armor plating in order to lower your cost. 43" tall.
SHORTIE ANIMAL TARGET BASE
Designed specifically for our reactive silhouette animal targets, the Armored Shortie Base is rifle rated and is designed to place your animal target at the appropriate height level with the ground. 12" tall.
| Weight | 45 lbs |
|---|---|
| Dimensions | 30 × 17 × 5 in |
You may also like…
-
The “Mini Mr Target” – 50% Scale IPSC Armored Steel Shooting Target
THE “MINI MR TARGET”
This target is a 1/2 scale (50%) IPSC plate – the “mini” version of our classic “MR TARGET” 2/3rd scale IPSC. This target is made with high quality 3/8” thick AR500 steel able to withstand thousands of pistol or rifle rounds*. Ideal for rifle training or IDPA. This target is also reversible…flip it over for a freshly painted side.
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
ALSO AVAILABLE in a 1/2″ THICK VERSION – higher durability for close-quarters / law-enforcement rifle work, or for larger rifle calibers. NOTE: 1/2″ Thick targets require our 1/2″ Thick Bracketed Fully Armored Base for proper mounting.
$160.00 – $470.00 -
IPSC Flapper – Armored Steel Reactive Shooting Target
$300.00 – $580.00IPSC Flapper
Flip the Flap, Then shoot through the hole as fast as you can!
This is a 2/3 scale IPSC plate made of 1/2″ THICK AR500 able to withstand thousands of rifle and pistol rounds*. This target has a 9” reactive flapper that flips up when hit. This unique target gives the shooter the challenge of knocking the flapper and then shooting through the aperture to hit another target beyond – using two or three VERY quick consecutive rounds. A highly engaging training target.
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target
NOTE: This 1/2″ AR500 Target requires our 1/2″ Armored Base for proper fit.
-
The Original “Mr Target” – 2/3rd Scale IPSC – Armored Steel Shooting Target
THE “MR TARGET”
This target is a 2/3rd scale solid IPSC plate. One of our most popular targets, the MR TARGET IPSC is made of the highest quality AR500 steel and is able to withstand thousands of pistol and rifle rounds*. Our targets assemble easily and use no nuts, bolts, or screws. The MR TARGET IPSC comes apart in seconds into 3 easily transportable pieces (H-base, upright center stand, and target plate) and will lay flat in the backseat.
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
ALSO AVAILABLE in a 1/2″ THICK VERSION – higher durability for close-quarters / law-enforcement rifle work, or for larger rifle calibers. NOTE: 1/2″ Thick targets require our 1/2″ Thick Bracketed Fully Armored Base for proper mounting.
$200.00 – $560.00
Related products
-
Standard Non-Armored Base for Throwing Targets
$230.00STANDARD NON-ARMORED BASE
43″ tall
Intended for use with our Axe Block Throwing Target, the Tall Standard Base leaves behind our rugged armor plating in order to lower your cost.
If you plan to take full advantage of our modular products, we recommend instead purchasing one of our rifle-rated armored bases for your Axe Block Throwing Target in order to easily swap your throwing target with any of our reactive steel shooting targets.
-
Tactical III – Armored Steel Reactive Shooting Target
$290.00 – $560.00TACTICAL III
The ultimate 3 stage 3/8” thick AR500 reactive target designed for head, heart, and gut shots that flip open and closed with every shot. Built to withstand thousands of rifle and pistol rounds*.
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target
-
Tall Armored Base – Modular Target Base System
$250.00TALL ARMORED BASE
Standing at 40” tall, this target base will raise your target to a more natural shooting position to promote muscle memory for close quarters training. This base has an armored center post to withstand thousands of rifle and handgun rounds.
All of our modular base systems are designed for easy setup and transport. Just two pieces, (the upright portion and the H-style base) assemble together in seconds, and lay flat when disassembled. Our modular target bracket has two available slots and is designed to accommodate any of our reactive or plate targets, along with an accessory rack for gongs, spinners, and other accessories.
If you are looking for a more permanent solution, simply remove the “H” base and pound the upright into the ground or pour concrete.
35lbs, 40″ tall, 3/8″ bracket for 3/8″ thick standard targets and accessories
