“THE PERFECT STAND” ARMORED GONG STAND – DOUBLE GONG
The PERFECT gong stand by MR TARGET is constructed of 100% high quality AR500 armored steel and is able to withstand thousands of pistol and rifle rounds*. There are no welds, nuts, bolts, or screws and the stand assembles in seconds without tools. Stores and lays completely flat, taking up a space that is only 4″ wide. The target stands 20″ tall when assembled and rings like a bell when hit!
Our DOUBLE Gong Stand uses the same modular cross-bar as our 2 GONG RACK! Separate the legs from your Double Gong Perfect Stand, and the cross bar will mount directly into one of our modular armored bases (sold separately), either as an accessory or as a stand-alone target.
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
“THE PERFECT STAND” ARMORED GONG STAND LEGS
(2 GONG RACK -> PERFECT GONG STAND CONVERSION)
Already have our 2 GONG RACK? Just need the legs to convert it into a PERFECT GONG STAND? These Gong Stand legs come in a pack of 4 (cross-bar, gongs, and hooks NOT included).
The PERFECT gong stand by MR TARGET is constructed of 100% high quality AR500 armored steel and is able to withstand thousands of pistol and rifle rounds*. There are no welds, nuts, bolts, or screws and the stand assembles in seconds without tools. Stores and lays completely flat, taking up a space that is only 4″ wide. Target stands 20″ tall when assembled and rings like a bell when hit!
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
“THE PERFECT STAND” ARMORED GONG STAND – SINGLE GONG
The PERFECT gong stand by MR TARGET is constructed of 100% high quality AR500 armored steel and is able to withstand thousands of pistol and rifle rounds*. There are no welds, nuts, bolts, or screws and the stand assembles in seconds without tools. Stores and lays completely flat, taking up a space that is only 4″ wide.
Target stands 20″ tall when assembled and rings like a bell when hit!
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
“THE PERFECT STAND” ARMORED GONG STAND – TRIPLE GONG
The PERFECT gong stand by MR TARGET is constructed of 100% high quality AR500 armored steel and is able to withstand thousands of pistol and rifle rounds*. There are no welds, nuts, bolts, or screws and the stand assembles in seconds without tools. Stores and lays completely flat, taking up a space that is only 4″ wide.
Target stands 20″ tall when assembled and rings like a bell when hit!
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
RIMFIRE GONG STAND
Lightweight, Portable and Compact…
Our PERFECT Rimfire Gong Stands are constructed from 100% high quality 3/16″ armored plate steel. There are no welds, nuts, bolts, or screws and the stand assembles in seconds without tools. Stores and lays completely flat, taking up a space that is only 4″ wide. The target stands 14″ tall when assembled and rings like a bell when hit!
Available in two configurations:
“THE PERFECT STAND” TALL ARMORED GONG STAND – SINGLE LARGE 18″ GONG
The PERFECT gong stand by MR TARGET is constructed of 100% high quality AR500 armored steel and is able to withstand thousands of pistol and rifle rounds*. There are no welds, nuts, bolts, or screws and the stand assembles in seconds without tools. Stores and lays completely flat, taking up a space that is only 4″ wide.
Target stands 26″ tall when assembled and rings like a bell when hit!
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
3/8″ THICK AR500 CIRCLE GONGS
Available in 12” 10” 8” 5″ 4″ 2″ and 1″ sizes. All Gong targets are cut from the highest quality 3/8″ AR500 armored steel, able to withstand thousands of pistol and rifle rounds*. 8″ sizes and up come with 4 holes for hanging, or they can be bolted to other objects. 5″ gongs and smaller have one hole to prevent binding. (STANDS AND HOOKS NOT INCLUDED)
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
MAGNETOSPEED T1000 GEN 2 TARGET HIT INDICATOR
The T1000 is a rugged target hit indicator with a weatherproof enclosure and long battery life. It was designed to be mounted to the back side of AR500 steel targets 10 inches in width or greater. While mounted, it is in an always-on state waiting for the next shot. The flexible rubber reflector is designed to withstand many impacts before needing to be replaced. Target preparation for the T1000 is quick and simple and it is also easily transferable to multiple targets using common Industrial hook & loop tape. The T1000 has multiple operating modes to best suit your shooting situation and is easily seen through any optic that is capable of seeing the target at that shooting distance.
NO tools, NO nuts or bolts, NO bearings… Made from 100% AR500 steel and able to withstand thousands of rifle and pistol rounds*.
Our quality Spinner Gong Combo Targets can be used in a stand-alone configuration or as an accessory with our steel and rubber target silhouettes. For our 3-zone target silhouettes, check out the TACTICAL III and F CLASS SPINNER or our TACTICAL III and F CLASS GONG RACK.
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
There are two types of spinner accessory paddles available:
Recommended Gong sizes include: 10″ or 12″
This Single Gong Rack Accessory is designed for our 3 plate silhouettes… but works for everything else.
Our single sided Gong Rack is available by itself or as a package. Choose from packages that include one of our modular bases, 2 new and improved S-hooks, and a variety of gongs. It has been specifically designed to be used with the TACTICAL III and F-CLASS targets so as not to interfere with the bottom GUT shot paddle (silhouettes not included). Made of AR500 steel and able to withstand thousands of rifle and pistol rounds*.
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.
Gong sizes available: 8″, 10″, 12″, or it will also hold 2 smaller gongs (4″/ 5″).
NOTE: TACTICAL III and F CLASS TARGETS NOT INCLUDED / SOLD SEPARATELY
THE 2 GONG RACK
The perfect modular solution for your hanging gongs. Designed to work with our modular bases… simply drop the 2 Gong Rack in the base, attach your gongs with the 4 modified S-Hooks (included) and you are ready to go! Constructed of high quality AR500 steel, able to withstand thousands of pistol and rifle rounds*.
Use as an accessory with our reactive steel silhouettes, or select a base and use as a stand-alone gong target.
Want even more modularity? Try our PERFECT GONG STAND LEGS to convert your 2 GONG RACK into a PERFECT GONG STAND.
*For rifle calibers 5.56 and up, MR TARGET recommends a minimum 100y distance for safety and longevity of your target.